700
| Parameter | Unit |
| Ход оси Х | мм |
| Ход оси Y | мм |
| Ход оси Z | мм |
| размеры стола | мм |
| Макс.усилие на рабочий стол | кг |
| обороты шпинделя | об/мин |
| конусность шпинделя | |
| двигатель шпинделя | кВт |
| объем хранилища инструментов | |
| максимальный диаметр инструмента | мм |
| длина инструмента | мм |
| вес инструмента | кг |
| скорость смены инструмента | сек |
| система охлаждающего резервуара | л |
| контроллер | |
| размеры станка | м |
| вес станка | кг |
MV154APC/E MV154APC/P MV154APC/HS 700 500 560 800x500 250 938-15000 BBT 40 15 48 ∅76.2 280 7 5 500 Quaser mill i 2.7x3.9x2.9 8500 700 500 560 800x500 250 1125-15000 BBT 40 22 48 ∅76.2 280 7 4 500 Fanuc 18iMB 2.7x3.9x2.9 8500 700 500 560 800x500 250 1400-15000 BBT 40 22 48 ∅76.2 280 7 2.9 500 Fanuc 18iMB 2.7x3.9x2.9 8500
The grease chamber volume at 7.5 cm3 can support 28,840 hr.
This LUBCON unit service life at 3 years as minimum is guaranteed.
TYPES OF SPINDLE:
Belt spindle
- Transmission: Belt driving
- Lubrication: Re-grease system
- 12,000 min-1, vibration 1.5μm with low noise level plus very low maintenance cost.
- 4 hybrid angular bearing plus one roller bearing in rear.
Coupling spindle
- Transmission: Coupling
- Lubrication: Re-grease system
- Highest rigidity 15,000 min-1 spindle.
- 4 ceramic ball bearing .
- Transmission: Coupling
- Lubrication: Grease packed system
- 8,000 min-1 spindle.
- 10,000 min-1 spindle(opt.)
- 12,000 min-1 spindle(opt.)
- 4 ball bearing large span
Wide-spaced, oversized linear guideways provide optimum stiffness with less friction, less heat and less thermal growth for faster traverse rates, longer machine life and greater positioning accuracy.
ATC system is designed for large capacity and fast performance. To ensure smooth and vibration-free tool changing, all MV-Series machines have their tool changer strategically located for minimal transfer of vibration—a unique design feature. All ATCs feature random-access, bi-directional indexing.
Versatile APCs (Automatic Pallet Changers)
Convenient access to the pallets for job setup is quickly and easily accomplished by simply swinging out the front door. The integrated APCs are not only ideally suited for direct clamping of fixtures and vices, but also the wide range of Quaser indexing/rotary table systems.
445,000 N hydraulic clamping force through four taper cones which use the same mechanism from our long proven horizontal center.
Special cares against swarfs have been built-in include:
- Air blasting at cones connection
- Air pressure monitor against swarf envision
Chips removal
Dual auger + main conveyor at the back for large volume swarf management.
Options:
- Dual rotary table
- Dual tool length measurement plus work probe by single optical interface
- Dual hydraulic fixture preparation
